Which Shenzhen LED display manufacturers are affordable?

Which Shenzhen LED display manufacturers are affordable? Shenzhen Honghe has established strategic partnership relationship with all well-known LD raw material suppliers and distributors at home and abroad, realizing resource complementarity, division of labor, cooperation and operation. Next, Honghe Display Editor will give you a brief introduction on the application and maintenance of LED backlight LCD.

Normally the default brightness of the display is 100. When using it, it should be manually lowered.
In fact, at present, almost all LED backlight displays are equipped with a variety of application modes for users to choose, such as "Internet mode" and "Game 1 mode". To put it bluntly, it is to adjust the brightness of the display to adapt to different application environments. Therefore, when users use it, they should choose the appropriate mode according to different application environments, instead of setting the brightness to a high level for a long time.

Display should also be combined with work and leisure
Because the basic display principle of LED backlight display is similar to that of traditional CCFL backlight display, it relies on the backlight tube to illuminate the image on the LCD screen. At the same time, the pixels of LCD are made up of many liquid crystals. If the LCD is used continuously for too long, the crystal will be aged or burned out. Once the damage occurs, the bright spots and bad spots we call them will appear. These damages are permanent and irrecoverable.
Generally speaking, in order to prolong the life of the display, it is not necessary to keep the LCD on for a long time (more than 72 consecutive hours). If not in use, turn off the display, or let the display display display white screen until it enters standby state.

Don't turn the brightness up.
Many users like to turn the brightness of the LED backlight display very high when using LCD, which makes the color of the display very bright, but in fact, this XI habit is not desirable. In the market, many businesses in order to attract the attention of consumers, so the brightness of the display will be set high, and in such a large environment as the market, consumers will not feel inappropriate. But when users use it in their own homes, the brightness of the display will be adjusted to a high level. On the one hand, it will affect the user's eyes, such as visual fatigue. After a short look, the eyes will feel dry, affecting the user's vision; on the other hand, it will affect the life of the LED.

Avoid bumping and scratching hard objects
For most LED backlight displays, their vulnerability is the screen. The hardness of the screen is generally less than 3H (the hardness of the pencil lead). It is easy to be "mistakenly damaged" by the device when it is used in ordinary times, and once the screen is damaged, it means that the LED display is basically scrapped.